Resistant harmonic reactor

1. Industrial production workshop

with low-voltage capacitor, it can suppress harmonics, improve power factor, ensure stable operation of equipment and reduce energy consumption.

2. Commercial complex

used for low-voltage power system, which can prevent harmonic interference, optimize voltage waveform, ensure the stability of power supply, and improve electricity consumption experience.

3. Data center

For the low-voltage system of the data center, suppress the harmonics, protect the capacitors, maintain the safety of the power grid, and ensure the stable operation of the data center.

• Connection mode

  Three phase: three in three out of the way, the above for the input end, the bottom for the output end.

  Single phase: one in one out way, above for the input end, below for the output end.

• Installation altitude: not higher than 2000m.

• Installation place: no violent mechanical vibration.

• Installation environment: the temperature is-25℃ ~ + 45℃, and the relative humidity does not exceed 90%.

• No inflammable and explosive and other dangerous goods around the installation, and good ventilation conditions around, if installed in the cabinet, ventilation equipment should be installed.
  

1、What is the working principle of the anti-harmonic reactor?

Based on the principle of electromagnetic induction, the antiharmonic reactor presents a high impedance to the high harmonics to block its circulation, so as to reduce the harmonic influence and ensure the stability of the power system.

2、Can the anti-harmonic reactor increase the power factor?

Ability. It can suppress harmonic interference, reduce reactive power, improve the current and voltage waveform, and thus indirectly improve the power factor and optimize the performance of the power system.

3、How to choose the appropriate anti-harmonic reactor?

It should be selected according to the harmonic content, rated voltage, current and other parameters of the power system. Ensure that the rated current of the reactor is greater than the maximum current of the system, and the reactance rate matches the harmonic times.

4. Is the maintenance of the anti-harmonic reactor complicated?

Not complex. Regularly check whether the appearance is damaged, whether the connection is loose, and monitor the operating temperature. Generally need no special maintenance, easy to operate.